Search found 21 matches

by hgz
Thu May 19, 2022 3:04 pm
Forum: Software
Topic: MQTT via IPv6 ?
Replies: 3
Views: 7739

Re: MQTT via IPv6 ?

Hallo Thomas, Dass data.muonpi.org und mail.muonpi.org identisch aufgelöst werden, ist tatsächlich so beabsichtigt und hängt mit den Anforderungen von einigen Mailprovidern zusammen, um ein Blacklisting zu vermeiden. In allen Fällen sollten momentan folgende Adressen immer auf demjenigen Host enden,...
by hgz
Wed Jan 12, 2022 11:31 am
Forum: Hardware
Topic: MuonPi Lite Board
Replies: 1
Views: 47110

Re: MuonPi Lite Board

After arrival of the partially assembled pre-series Lite boards after X-mas, I soldered the remaining components to obtain one complete board for testing. Assembly was a piece of cake due to the possibility to simply plug in the ADC and DAC components through the corresponding breakout boards availa...
by hgz
Sat Jan 01, 2022 12:32 pm
Forum: Hardware
Topic: MuonPi Lite Board
Replies: 1
Views: 35285

Re: MuonPi Lite Board

Die teilbestückten Lite-Boards sind vor Weihnachten von JLCPCB eingetroffen. Eines davon habe ich auuch gleich bestückt. Da fast nur noch SO8 und SO16 ICs aufzulöten waren, ging das auch sehr schnell und entspannt (s. Foto). Leider habe ich an der Stelle von U2 einen TLV3502 bestückt, da dieser ja v...
by hgz
Sun Dec 05, 2021 12:38 pm
Forum: Hardware
Topic: MuonPi Lite Board
Replies: 1
Views: 35285

MuonPi Lite Board

Aufgrund der langen Lieferzeiten einiger auf dem HAT-Board eingesetzter Komponenten haben wir ein auf die wesentlichen Funktionen um einen Myonendetektor zu betreiben reduziertes Board, das Lite-Board, entworfen. Der größere Funktionsumfang des HAT-Boards kann von vielen Benutzern nicht genutzt werd...
by hgz
Sun Dec 05, 2021 12:24 pm
Forum: Hardware
Topic: MuonPi Lite Board
Replies: 1
Views: 47110

MuonPi Lite Board

Due to the long lead times of components used for the HAT board, we developed the MuonPi Lite board, a light-weight simplified board with fewer components featuring only a single readout channel but with otherwise identical basic functionality. some components are foreseen in this version to be prov...
by hgz
Sun Dec 05, 2021 12:04 am
Forum: Hardware
Topic: MuonPi HAT Version 3.2
Replies: 0
Views: 10371

MuonPi HAT Version 3.2

Hi There, An updated and revised version 3.2 of the MuonPi HAT PCB is currently in production at JLCPCB including partial mounting of components and expected to arrive within the next two weeks. The revision is intented to be entirely compatible (100% software compatible, downward compatible wrt har...
by hgz
Sat Dec 04, 2021 11:28 pm
Forum: Hardware
Topic: MuonPi HAT Version 3.2
Replies: 0
Views: 10954

MuonPi HAT Version 3.2

Hallo Zusammen, Eine überarbeitete und verbesserte Version des MuonPi HAT-Boards, nämlich V3.2 ist bei JLCPCB inkl. Teilbestückung bestellt worden und wird vorauss. innerhalb der nächsten zwei Wochen ausgeliefert. Die Revision ist vollständig kompatibel (100% Softwarekompatibel, Abwärtskompatibel bz...
by hgz
Wed Apr 07, 2021 12:01 pm
Forum: Hardware
Topic: Modification: reducing the LED brightness
Replies: 1
Views: 10534

Re: Modification: reducing the LED brightness

Perfect. Many thanks for the effort, Christian! I will place the alternative set of resistors on the assembly page in the wiki. In this way everyone can chose at building time his preference for the LED brightness. Note, that in the next hardware revision the LEDs are foreseen to be dimmable via the...
by hgz
Tue Mar 30, 2021 5:19 pm
Forum: Hardware
Topic: Peak Detektor
Replies: 0
Views: 17923

Peak Detektor

Hi all, I just mounted and tested the new version of the plug-on Peak Detector module (PD2) for the amplitude measurement of the muon signals. Still not pleased with the performance, but energy loss spectrum as recorded and displayed in the GUI (see photos) seem to be plausible. The focus will now m...
by hgz
Tue Mar 30, 2021 5:19 pm
Forum: Hardware
Topic: Peak Detektor
Replies: 0
Views: 10720

Peak Detektor

Hallo,
Ich habe mal die neue Version des Plug-On Peakdetektor-Moduls (PD2) zur Pulshöhenmessung der Myonensignale aufgebaut und getestet. Ganz zufrieden bin ich noch nicht, aber das Energieverlustspektrum wird zumindest in Teilen richtig wiedergegeben (s. Bilder).
hgz